Home› Products and Services› SPX FLOW› Seital Separator
SPX FLOW - Seital Separator

Disk Centrifuge
Separation
Seital Separation Technology strives to manufacture high performing, high quality separators based on continuous investments in research and development activities. Possessing a highly qualified and skilled team of engineers that analyse new separation challenges and provide innovative solutions to the marketplace, Seital Separation Technology aims to provide customised separation solutions based on specific customer requirements.
The Seital Separation Technology brand carries the following products:
Seital Separation Technology
SPX FLOW Seital Separation Technology offers a wide range of self-cleaning separators for liquid/liquid/solid separation. This type of separator allows for the recovery of fine particles (0,5-500 µm), the efficient separation of a mixture into its two phases and the contemporary clarification of both by means of a very high peripheral centrifugal field (G-force).
Self-Cleaning Separators
Various automatic, independent working cycles may be selected to perform partial and/or total discharges during separation and cleaning procedures. By setting the PLC it is possible to adjust the discharge volume, the frequency and the combination between partial and total discharges. The PLC can also perform the following functions: automatic bowl closing during the starting phase; stop feeding during total discharges; rinsing of all internal surfaces before and after the discharge; manual control of partial and total discharges; bowl overflow (during CIP); product recirculation.
Self-Cleaning Clarifiers
Self-cleaning clarifiers feature automatic control, where the periodic solids discharge is carried out automatically by means of a PLC which controls the opening and closing water solenoid valves and the solenoid valves of the operating water circuit. Various automatic, independent working cycles may be selected to perform partial and/or total discharges during separation and cleaning cycle. By setting the PLC it is possible to adjust the discharged volume, the frequency and the combination between partial and total discharges.
Solids Retaining Separators
SPX FLOW Seital Separation Technology offers a wide range of solids-retaining separators for liquid/liquid/solid separation with very low solids content in the feed (less than 0.2% in volume). This type of separator allows efficient separation of a mixture into its two phases and the recovery of fine particles (0.5-500 µm) by means of a very high peripheral centrifugal field (G-force). The separation process takes place in the bowl of the high speed separator.
Self-Cleaning Nozzle Separators
For liquid/solid separation with high solid content where separated solids (concentrate) must be continuously discharged, Seital Separator proposes a wide range of self-cleaning nozzle separators. This kind of separator allows the clarification of the liquid and the discharge of a phase highly concentrated in solids.
Solids Retaining Clarifiers
Seital Separation Technology offers a wide range of solids retaining separators for liquid/solid separation with a very low solids content in the feed (less than 0.2% in volume). This type of separator allows clarification of liquids and the recovery of fine particles (0.5-500 µm) by means of a very high peripheral centrifugal field (G-force). The separation process takes place in the bowl of the separator rotating at a high speed.
APEQ Process is an official distributor of SPX FLOW, Seital Separation Technology in Malaysia.
Need a price quotation?
Enquire now >
About SPX FLOW and Seital Separation Technology
Based in Charlotte, North Carolina, SPX FLOW innovates with customers to help feed and enhance the world by designing, delivering and servicing high value solutions at the heart of growing and sustaining our diverse communities.
Seital Separation Technology, now an esteemed product series of SPX FLOW, is engineered and manufactured in Santorso Vicenza, Italy. Since its establishment in 1983, Seital has distinguished itself as a producer of high quality separation technology. Great care goes into every design to ensure adherence to exacting customer requirements.



Catalogue/ Brochure/ Technical Specification

 

Seital Separation Technology - High Performance Separation Technology
Seital Separation Technology - Dairy
Seital Separation Technology - Brewery
Seital Separation Technology - Wine


Hide

Related Products

APV Heat Exchanger

Be it sanitary processes or processes requiring very small flow, SPX FLOW has the perfect heat exchanger for the fit. The global applications for industrial heat exchangers calls for a wide and deep product range, putting great demand on the equipment.

APV Centrifugal Pump

APV's premium sanitary pump for food and pharmaceutical industry. This is suitable for liquid products of less than 500 cps, has no particle, abrasive, non-shear sensitive and non-high pressure application.

APV Positive Displacement Pump

The DW series is SPX FLOW's latest technology positive displacement pump range. All 26 DW models are hygienic, 3-A and EHEDG approved and cover all requirements from 3 litres /100 revs to 1016/100 revs. Maximum pressure up to 30bar.

APV Seat Valve

SPX FLOW has decades of experience in valve design. Years of intensive, worldwide-scale development has resulted in APV's complete range of hygienic seat valves in the brewery, dairy, food, beverage, chemical, health care and pharmaceutical industries.

APV Mix Proof Valve

The mix proof valve technology is the result of continued development from both APV and Waukesha Cherry-Burrell, which helps fulfil customer demands for production flexibility, increased productivity, rapid return on investment (ROI).

APV Safety Valve

SPX FLOW APV has especially developed safety valves to protect installations against excess pressure. If the set pressure is exceeded, the valve opens.

APV Homogenizer

APV has been a pioneer in the field of homogenization with its durable Rannie and Gaulin brand for over 100 years. APV's machines are optimized for sustainable, economic production while providing consistent, reliable performance.

APV Mixer

APV has an extensive mixer portfolio offering the flexibility to handle all types of products, quickly and efficiently. Our mixers are utilized in industries as diverse as processed food, beverage & brewing, dairy and personal care.

Anhydro

SPX FLOW offers a wide range of Anhydro dryers. The majority of drying options can be supplied in standard and GMP configurations, while specialized options can be supplied in accordance with aseptic standards.

Seital Separation Technology

SPX FLOW's Seital Separation Technology is used throughout the world in many Food and Beverage applications. Seital Separation disk centrifuges feature a compact size, high level of performance and have a competitive price.

Graco® Saniforce®

The new SaniForce® line saves your time and money by pumping the most difficult materials – quickly and safely! The line includes: Air-operated double diaphragm pumps, piston transfer pumps and drum bin unloaders.

Graco® Husky®

Suitable for low to high viscosity fluids for a variety of aggressive applications. The Husky® line includes double diaphragm pumps, peristaltic hose pumps, piston pumps and high pressure cleaning equipment.

Flottweg® Decanter®

Continuous separation of suspended solids from liquids, clarification of liquid, classification of fine pigments, etc. Suitable for plastic production, clarification of beverages, recovery & processing fats, etc.

Flottweg® Sedicanter®

Flottweg® sedicanter® is preferably used in cases where solids are too fine and where sediment has soft consistency. These cases include: beer recovery, vegetable proteins recovery, or biomass separation.

Flottweg® Tricanter®

Features continuous 3-phase separation, i.e. simultaneous separation of two immiscible liquids and one solid phase. Suitable for applications like oil sludge process, animal and vegetable fats recovery, etc.

Flottweg® Sorticanter®

Sorticanter® is for processes that consist of carrier liquid with specific gravity between the densities of the 2 solid phases to be separated, like plastic recycling, or separation of mixture with floating and settling components.

Hydrolock® ACB Series

ACB series of continuous sterilizers are designed to be efficient on plastic bottle packaging such as HDPE and PP. It features even rotation, space-saving and can be fully automated.

Hydrolock® ACCT Series

The ACCT series specializes on continuous sterilization of tin cans. Its continuous retort systems include rolling and rotation of can products to ensure even heating and cooling.

Flottweg® Belt Press

Flottweg® Belt Press is a pneumatic belt-control, self-cleaning system that ensures a reliable operation with minimal manpower. Suitable for juice extraction from fruits, extraction from algae, coffee grounds, etc.

Pipetite®

Pipetite® is designed to completely seal around pipe and tube as it passes through walls and floors. Pipetite® is completely flexible, so it stays in place and maintains a seal despite pipeline vibration and movement.

Kaite®

Kaite® Ltd is a modern company specialising in the design, manufacture and supply of spray nozzles and ancillary equipment. The Kaite® brand is built on several decades of experience with an injection of fresh ideas and innovation!
APEQ Process Malaysia
(848195-D)
Email  : enquiry@apeqprocess.com
Contact : 03-5524 1830
Address  : 9, Jalan 15/22, Tiong Nam Industrial Park, Seksyen 15, 40200 Shah Alam, Selangor
Copyright 2018 APEQ Process Malaysia. All rights reserved.
Aether Web Development ( SA0497413-H ) - Copyright reserved 2018